Tag Archives: Windows 2012 R2

Getting IP-HTTPS error code 0x274c?

Hello fellow DirectAccess admins!  I apologize for the long gap since my last posting.  I’ve been pretty heads down with a lot of DirectAccess work in the field and haven’t had much spare time to write new articles.  I’m hoping to bring a bunch of new articles in the coming weeks! Now for todays’ posting, […]

Getting IP-HTTPS error code 0x643?

We’ve had a couple reports of visitors to this site hitting IP-HTTPS error code 0x643 so I’m going to devote this article to the cause and resolution today. If your client is trying to connect using IP-HTTPS, you will encounter this error code if the IP-HTTPS adapter on your DirectAccess client/server has been disabled. As […]

Getting IP-HTTPS error code 0x80090326?

Good morning fellow DirectAcess admins! On a recent customer visit we ran across an IP-HTTPS error code that was new for me. After doing some searches out on the Internet, it looks like this one isn’t well documented so I wanted to share out the findings. The error code in question we discovered was 0x80090326. […]

Getting IP-HTTPS error code 0x34?

I’ve had a few reports recently from some visitors about IP-HTTPS error code 0x34 on Windows 8 and Windows 8.1 systems. As reference, you can run the following command on your DirectAccess client to check the state of the IP-HTTPS adapter : netsh int https show int You will get an output that will show […]