Tag Archives: Windows 2012

Getting IP-HTTPS error code 0x274c?

Hello fellow DirectAccess admins!  I apologize for the long gap since my last posting.  I’ve been pretty heads down with a lot of DirectAccess work in the field and haven’t had much spare time to write new articles.  I’m hoping to bring a bunch of new articles in the coming weeks! Now for todays’ posting, […]

Getting IP-HTTPS error code 0x643?

We’ve had a couple reports of visitors to this site hitting IP-HTTPS error code 0x643 so I’m going to devote this article to the cause and resolution today. If your client is trying to connect using IP-HTTPS, you will encounter this error code if the IP-HTTPS adapter on your DirectAccess client/server has been disabled. As […]

Getting IP-HTTPS error code 0x80090326?

Good morning fellow DirectAcess admins! On a recent customer visit we ran across an IP-HTTPS error code that was new for me. After doing some searches out on the Internet, it looks like this one isn’t well documented so I wanted to share out the findings. The error code in question we discovered was 0x80090326. […]

Getting IP-HTTPS error code 0x34?

I’ve had a few reports recently from some visitors about IP-HTTPS error code 0x34 on Windows 8 and Windows 8.1 systems. As reference, you can run the following command on your DirectAccess client to check the state of the IP-HTTPS adapter : netsh int https show int You will get an output that will show […]

WinRM client errors in Remote Access console

Good afternoon DirectAccess admins! Today’s posting is going to go over a recent error I’ve seen with a customer that took some time to work through.  I appreciate the customer from California for being so patient working through this error! I was working to setup a new DirectAccess install for a customer.  We went through […]

NRPT hotfix for Windows 7, 8, 2008 R2, and 2012

Hi again fellow DirectAccess admins!  This week I wanted to let everyone know about a recent hotfix we’ve published to correct an issue that some of you might hit in a large DirectAccess configuration.  The Name Resolution Policy Table (NRPT) is a pivotal function included in the Windows 7 and 2008 R2 onwards that provides […]

New hotfix for Remote Assistance with Windows 7 DirectAccess clients!

I’m happy to announce we have just released a new hotfix specifically for Remote Assistance on Windows 7 DirectAccess clients!  I’ve actually encountered this issue with a few DirectAccess deployments and some of you have dropped comments asking about a solution. The core of the issue is that Remote Assistance in Windows 7 would only […]

Errors with Outlook and DirectAccess forced tunneling

Today’s topic we are going to cover a new Outlook error message I discovered today working with a DirectAccess client specially using forced tunneling. Earlier this week I helped get a client setup using DirectAccess and due to security reasons, they had to configure their DirectAccess clients using forced tunneling.  With this configuration, all traffic […]

Setting up single-NIC DirectAccess servers with an External Load Balancer

After looking at common search engine referral terms, we are going to cover how to setup your DirectAccess deployment using an External Load Balancer with a single NIC this time around.  With DirectAccess in Windows 2012, we provide two load balancing options.  The first load balancing configuration is to use the built-in Windows Network Load […]

Getting IP-HTTPS error code 0x4BE?

Hello fellow DirectAccess admins!  Sorry for the lack of posts in the past couple of weeks, I’ve been out on holiday and just getting ramped back up today.  For today’s posting, we are going to cover the reason for IP-HTTPS error code 0x4BE.  One of my fellow co-workers filled me in with details on this […]